Reinforcing Glass Grid Asphalt Fiberglass Geogrid 120Kn Preventing
Road Surface Cracks
1. Fiberglass geogrid Basic definition and structure
Material composition
Based on alkaline glass fiber yarn, it is coated with modified
asphalt or polymer material to form a grid structure.
It has high strength, low elongation (<4%), high temperature
resistance (melting point 1000℃) and low temperature resistance
(-100℃).
Structural features
The warp knitting process enhances the fiber strength, improves the
tensile, tear and creep resistance.
The coating process can enhance the wear resistance and shear
resistance and extend the service life.
2. Mainly application place
Road engineering
Asphalt pavement reinforcement: prevent reflective cracks and delay
rutting, suitable for old cement road reconstruction, bridge and
tunnel connections, etc.
Roadbed reinforcement: control uneven settlement at the junction of
new and old roadbeds.
Slope protection, dam reinforcement, reservoir anti-seepage and
other scenarios, provide anti-scouring and soil stability.
3. Advantages and performance
Mechanical properties
High tensile strength (elastic modulus is 20 times higher than
asphalt concrete), low elongation (<3%), no long-term creep.
Corrosion and chemical erosion resistance (good compatibility with
asphalt mixture).
Convenience of construction
Closely combined with asphalt pavement, high construction
efficiency, and lower cost than traditional steel materials.
4. Technical standards
Yixing Shenzhou Fiberglass Geogrid has passed CE certification and
complies with ISO quality system requirements.
5. Construction technology reference
Construction needs to be combined with slope leveling, material
laying and compaction technology, please refer to technical
documents.
Application cases include highway, railway roadbed reinforcement
and ecological slope protection projects
Asphalt Fiberglass Geogrid :
Fiberglass geogrid technological standard(GB/T 21825-2008) |
specification | FG30×30 | FG50×50 | FG
60×60 | FG
80×80 | FG
100×100 | FG
120×120 | FG
150×150 |
Mesh center distance(mm) | MD | 25.4±3.8 , 12.7±3.8 |
CMD | 25.4±3.8 , 12.7±3.8 |
breaking strength(kn/m) | MD | 30 | 50 | 60 | 80 | 100 | 120 | 150 |
CMD | 30 | 50 | 60 | 80 | 100 | 120 | 150 |
Breaking Elongation(%) | MD | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
CMD | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Width(m) | 1m-6m | 1m-6m | 1m-6m | 1m-6m | 1m-6m | 1m-6m | 1m-6m |
Asphalt Fiberglass Geogrid Professional Installation Guide :
Surface Preparation:
Mill existing pavement as needed
Apply polymer-modified tack coat (0.6-0.8 kg/m²)
Geogrid Placement:
Unroll with machine direction perpendicular to traffic flow
Minimum 300mm side overlaps, 500mm end overlaps
Asphalt Placement:
Minimum 75mm overlay thickness recommended
Maintain ≥150°C mix temperature during placement
